ACCU THERMO TYPE 24 SPECIAL

The ACCU THERMO battery has been designed to efficiently and reliably supply power to heated dive wear and umbilical dive lights operating at 12V.
Simple and intuitive control, efficiency, and the highest possible durability distinguish ACCU THERMO from other devices on the market of modern diving equipment. ACCU THERMO has two connection ports. They’re located at the top part of the casing. One port with a permanently installed E / O cord (cords with wet connector) is to be used only for the heated dive wear. The heating supply has a three-stage heating control at the ranges of: 0 / 70% / 100%. This port is equipped with the so-called intelligent E / O circuit. 200 W is the total electrical load capacity of the connected equipment (lighting, heated dive wear: undersuit, vest, gloves)!

It is an electronic circuit that protects the E / O cord (the metal pins in the E / O cord connector) against the harmful effects of electrolysis. When ACCU THERMO is not connected to any receiver (e.g., a heated vest), there is no voltage on the wet connector (E/O cord end). Thanks to the „intelligent E/O”, voltage is cut off automatically also when the cord gets unplugged during operation. This way, anytime the unconnected E/O cord is in the water, an electrical current doesn’t pass through its pins, making the system safe from damage.

The casing is made of a hard anodized aluminium. The aluminium alloy used in ACCU THERMO is light, durable and resistant to corrosion in sea water. Additionally, the aluminium elements of ACCU THERMO have been covered with a protective layer of a hard anode. It makes the battery even more resistant to wear and mechanical damage. All graphics and inscriptions on the casing are laser-engraved, which makes them easy to read, as well as highly durable. The ACCU THERMO 24 Special casing is secured with two O-rings.

ACCU THERMO is the only battery on the market equipped with a safety exhaust valve. The Safety Valve is located in the lower part of the casing and it protects the battery against damage. In the event of a Li-Ion battery pack failure, gas may be emitted and as a result, the battery casing may explode. The valve is maintenance-free and should not be disassembled. Do not interfere with the operation of the valve in any way.

The transportation of lithium batteries is subject to international regulations that may vary depending on the type of transport: whether it is by sea, road, or air. To meet strict transport safety standards, the lithium-ion (Li-Ion) batteries used in ACCU THERMO meet the requirements of UN Transportation Testing (UN / DOT 38.3).

We offer ACCU THERMO as a set which includes:

• ACCU THERMO,
• Universal handle for attaching the battery to a harness,
• AMMO LITHIUM CHARGER,
• Blind plug for E / O cord,
• Silicone band for E / O cord,
• Ammonite Butter - silicone grease,
• Two silicone O-rings.

Product code: